Advanced Gutter Protection
Our gutter protection systems are engineered to withstand the harshest weather conditions on Vancouver Island. Beyond preventing clogs, our Canadian-made solutions reinforce your gutters, supporting over 250 pounds per foot, and shield against UV damage to maintain sealant integrity.
Designed for durability, these systems ensure your gutters perform reliably in any environment.
Strength with Continuous Hanger™ Systems
Traditional gutter installations rely on spaced hangers, leaving weak points that can sag or fail. Our Continuous Hanger™ technology strengthens the entire length of the gutter, eliminating vulnerabilities. Benefits include:
Unobstructed water flow for consistent drainage.
Exceptional strength, capable of supporting significant weight.
UV protection to prevent sealant degradation and leaks.
Rain gutters are commonly installed with spaced hangers that cause weak spots on the gutter between each hanger.
To avoid weak spots, hundreds of hangers would need to be added, but this is not a very efficient practice.
With a continuous hanger™ the rain gutters are reinforced along their entire length.
DoublePro
The DoublePro® system combines a continuous hanger with dual-layer microfiltration to keep out even the smallest debris, like pine needles. Built to endure Canada’s harshest climates, it ensures clog-free performance and comes with a 360° lifetime warranty covering materials, strength, and anti-clogging in pine-heavy areas.
Alu-Rex’s flagship product is backed by the industry’s most aggressive warranty – a lifetime warranty on anti-clogging qualities, materials and strength. The DoublePro is the only eavestrough guard with an anti-clogging warranty in the pine tree zone.
360° Lifetime Warranty
Clear Area
Ultra-Durable
T-Rex Gutter System
The T-Rex® system enhances gutter strength by 50% compared to traditional methods, supporting up to 250 pounds per linear foot. Resistant to bending and twisting, it’s backed by a lifetime warranty, ensuring your gutters remain robust and visually appealing for decades.
Contact Us
FAQ
What does the DoublePro Microfiltration Continuous Hanger™ 360° warranty covered?
Alu-Rex’s flagship product is covered by the most extensive warranty in the industry: a lifetime warranty on materials, durability, and clog-free performance. DoublePro is the only gutter guard whose clog-free warranty covers pine areas.
Do wet leaves stick to Alu-Rex products?
Only temporarily. Alu-Rex products boast a smooth, perforated surface. Just as they may temporarily stick to the hood of your car, leaves and debris that land on the surface of Alu-Rex products dry quickly in the sun. And unlike your car hood, the surface of your eavestrough is perforated, so it dries faster!
A little wind is all it takes to sweep away dry leaves and debris:
A 10 km/h wind effectively removes wet leaves and about 100 pine needles per linear foot.
A 37 km/h wind can remove about an inch (2.5 cm) of pine needles per linear foot
How do Alu-Rex products stand up to snow?
Alu-Rex products significantly reduce the weight of snow on your eavestroughs. Since snow can’t get into the gutters, the weight they must carry is limited to that which accumulates on top of Alu-Rex products. Furthermore, the eavestroughs remain fully functional so water from melting snow and ice can drain away freely.
Without Alu-Rex products, gutters already clogged with leaves and debris fill with snow and ice, which prevents them from doing their job and draining water away in spring. Additionally, they have to support more weight.
Do DoublePro, T-Rex or the Gutter Clean System increase ice formation?
Alu-Rex products prevent the formation of ice. If icicles form at the edge of the roof, we recommend that you check whether the attic is well ventilated and insulated properly.
Can the installation of Alu-Rex products create leaks in my roof?
No. Alu-Rex products do not cause leaks. During installation, no shingles are raised, and no nails or screws are driven into the roof.
Beware of look-alike products that require you to lift the shingles. These products can lead to leaks. In time, the asphalt shingles dry out and become brittle. It’s never a good idea to lift shingles when installing eavestrough protections systems, whether they’re nailed in, screwed on, or set in place.
Also, the manufacturer’s warranty on asphalt shingles is void if the shingles are lifted, peeled away, or modified.
Can Alu-Rex products withstand heavy water flow?
Even if all the perforations get covered, which never happens because the wind sweeps away leaves and debris, Alu-Rex products can drain up to three times the quantity of water ever recorded in the heaviest rainstorm.
How? Because wet leaves remain permeable, water still gets between the leaves, allowing it to drain into the eavestrough. Water will always find its way into the holes.
Additionally, the exclusive design of Alu-Rex products features an approximately 0.4 in. (1 cm) deep basin. Testing in the lab and in the field has shown this to be the right depth to catch more water without stopping the wind from doing its job of sweeping away leaves, pine needles, and debris from the surface.
Beware of completely flat look-alike products. Water can overflow when products are not equipped with a basin.
Which Alu-Rex product should I choose if I have problems with pine needles?
The DoublePro Microfiltration Continuous Hanger™ keeps debris from getting inside the gutter. The offset holes make it the perfect filter, allowing water to drain freely while blocking pine needles and leaves without ever getting clogged.
What is the maximum weight my eavestrough can support when fastened with a continuous hanger™ system?
The maximum weight your gutter can support with a continuous hanger system, like the DoublePro or the T-Rex is at least 250 lb per linear foot (373 kg per linear meter). That’s 50% stronger than with spikes or hangers.
What is the point of using the DoublePro or the T-Rex if there are no trees near my home?
It may seem unnecessary to use the DoublePro or T-Rex continuous hanger system if there are no trees around your home. But the continuous hanger’s main strengths are its robustness, strength, durability, and quality.
With a continuous hanger, your eavestroughs will be stronger and more durable than any others. New trees may grow… and your eavestroughs will still be in perfect condition after 25, 30, and even 40 years! People who buy the DoublePro™ or T-Rex® system want what’s best for their gutters, just as they do for their doors, windows, and all other components of their home.
Why is the DoublePro or the T-Rex continuous hanger system better than spikes, screws, and hangers?
Spikes, screws, and hangers provide a certain degree of strength, but only over a few inches to either side of them. The spaces between the spikes/screws/hangers are weak.
With DoublePro or T-Rex, your eavestrough is equally solid across its entire length. There are no weak spots.
Do Alu-Rex products require maintenance?
The DoublePro, Gutter Clean System and T-Rex are among the most efficient eavestrough protection systems today.
In most cases, a light breeze is enough to sweep away regular debris. In areas under the roof or under shallow overhangs on sloped roofs, debris may build up where the wind cannot reach it.
We recommend you occasionally clean out these areas to keep your Alu-Rex products in good condition.
Why doesn’t water go into my eavestroughs? There are simply not enough holes, or they are too small.
The exclusive Alu-Perf technology is the result of extensive research and development. The product has 489 holes every 19 inches (48 cm). This allows water to drain at the same rate as a 2 in. x 3 in. (5 cm x 7.5 cm) downspout.
Rigorous testing by an independent certification agency has proven that Alu-Rex products can drain over 32.9 in. (836 mm) of water an hour over a length of 20 feet (6 m). And with 200,000,000 feet (60,960,000 metres) of Alu-Rex products installed around the world, the figures speak for themselves…
Note: The highest amount of rainfall ever recorded worldwide was 12 in. (305 mm) of water in one hour (Holt, MO, 1947). In comparison, the 1996 Saguenay flood in Quebec was triggered by 11 in. (275 mm) of rain in three days. Alu-Rex products would have been able to handle all that rain in just one hour and three times more!
Overflow is usually caused by the eavestroughs themselves (not wide enough or deep enough for the roof surface) or the downspouts (insufficient number for the roof’s surface). It is important to make sure there are enough downspouts to avoid this problem. For this purpose, you need to keep in mind that one downspout is enough to drain the equivalent of a 600 sq. ft. (56 m²) roof.
In short, if you don’t have backflow problems with your current gutters in heavy rainfalls, the DoublePro, T-Rex and Gutter Clean System won’t create them.
Aren’t metal grills or plastic mesh enough for my home?
It’s tempting to believe that a simple plastic mesh roll that costs $4 per 20-foot (6.1 meters) can do the job, but this isn’t the case.
The openings in these products are much too large. Debris can get inside, and leaves can get stuck, clogging the eavestroughs and turning them into fertile soil for plants to grow in. These products are also not rigid and bend under snow and ice.
In short, these products will still force you to climb a ladder to clear out your gutters periodically.